Characteristics:

• Good adhesion to most PP. When used with hardener and treatment agent can also achieve good  adhesion to some PE materials.
• From high gloss to semi gloss.

Application Industries :

• PP Plastic
• PP packaging
• PP decoration

Applicable Materials:

• Rigid PP and some rigid PE.

Physical Features:

• Mesh count:77T-120T
• Surface drying time: natural air dry 8-15 mins.
• Full drying time: natural air dry 8-12 hrs.
• Thinner: S-3 (very slow), S-4 (slow), S-16(regular), S-36(fast)
• Cleaner: S-186
• Antifoaming agent: specific antifoaming agent used for PP printing ink.

Applications:

• Make sure you choose the suitable ink before use. Open the packaging to check whether or not precipitation, hard-setting, gelation, and color distortion arose. Stir well before use;
• Apply PPB specific thinner (S-3 very slow,S-4 slow, S-16 regular,S-36 fast) to achieve a printable viscosity;
• Apply pre-test before actual printing, Check the performance after air dry 24 hours;
• Select XB2-515 Hardener when using a 2 part system. Add 10-15% (W/W) then mix well. The mixed ink must be used up within 4-6 hours. After this time product adhesion will reduce drastically.
• Before printing, apply PP or PE treatment agent to pre treat the surface of certain materials that have insufficient adhesion.
• No mixing it with other series inks.

• No treatment required glossy fast dry
• Scratch resistant
• Excellent coverage
• Pantone colors available.

• Suitable to print PP container and lids,
•  High gloss,
• Fast dry,
• Good adhesion,
• Chemical resistance etc.
•  Pantone colors available.

• Suitable to print PP container,

• Lids cartridge etc.