Sieving capacity: 40-120T

Tack-free time: 10-15 minutes, natural volatilization

Hard drying time: 6-10 hours, natural volatilization

Thinner: S-16, S-63

Cleaner: S-186

Antifoaming agent: EVA specific antifoaming agent

Coverage: 20-30 m2/kg (use of 77T polyester filament and photosensitive

half-tone screen)

Color matching system: Only used with this series, do not use it with other series of inks.

1) Stir it well before use, and seal the container tightly after handle.

2) Add 20-30% thinner to meet your requirements.

3) Use CLJ-30 EVA treating compound to treat EVA substrate to improve adhesion before printing when necessary.

4) For overprinting, the next color is printed only after tack free.

5) Use thinner or cleaner to lean filled screen to avoid poor printing quality.

6) Do not use it with other series of inks to avoid poor printing quality.

1) It is necessary to do tests before volume printing because different ink is applicable for different material.

2) Static accumulated on screen or substrate may result in cavitations in print.

3) Use proper thinner according to current weather conditions.

4) Do not let print contact with PVC material containing plasticizer.

Hazardous Substance:

Class 4 Petroleum No.2.

1) Please wear gloves and safety glasses in case of contact with skin and eyes. If ink splashes onto skin or into eyes, rinse immediately with plenty of water, and seek medical advice.

2) Store container in a cool, dry place. Keep away from source of heat, flame and direct sunlight.

We strongly recommend that you handle this product according to MSDS.